RAK 7258/7268 Indoor LoRaWAN Gateway Firmware Upgrade
To update the RAK gateway firmware follow these instructions:
Find the IP address of that gateway on your network. You can log into your router to see the assigned IP address to RAK
Unzip this file
Log into RAK gateway at the IP address. The default credentials are: username: root, password: root. It will first come up with a security screen "Your connection is not private". Click "Advanced" and "proceed"
In the left pane, click System->Backup/Flash Firmware, then "Choose File" - the one you unzipped earlier, and press "Flash Image...". IMPORTANT: select "Keep settings after updating", if such option is available, and press "Update".
That's it.
Related Articles
RAK7268V2/RAK7268CV2 Indoor LoRaWAN Gateway Firmware Upgrade
ALERT: This firmware (WisGateOS 2) is applicable only to V2 version of RAK7268. Non-V2 RAK7268 or RAK7258 have different firmware WisGateOS. For non-V2 RAK7258 or RAK7268 firmware update, see here: ...
Instruction Manual for Zenseio LSMP-2103 Device
1. Document revision 1.35 January 15, 2026 Copyright 2017-2026 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used industrial sensors using ...
Instruction Manual for Zenseio CSMP-4103 Device
1. Document revision 1.15 January 15, 2026 Copyright 2017-2026 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used industrial sensors ...
LoRaWAN Product Certification
Reducing Signal Interference for a LoRa Gateway
If the gateway is missing lots of LoRa messages, it could be due to strong radio interference from other telecomunications equipment mounted close to the gateway. Relocating the gateway as far as you can from the interference source would be the best ...