RAK7268V2/RAK7268CV2 Indoor LoRaWAN Gateway Firmware Upgrade
RAK gateways are not set up with remote firmware update capabilities. But, it's pretty easy to upgrade the firmware yourself.
Find the IP address of that gateway on your network. You can log into your router to see the assigned IP address to RAK
Unzip this file
Log into RAK gateway at the IP address. The default credentials are: username: root, password: root. It will first come up with a security screen "Your connection is not private". Click "Advanced" and "proceed"
In the left pane, click Settings->Firmware, then "Choose File" - the one you unzipped earlier. IMPORTANT: select "Keep settings after updating" and press "Update"
That's it.
Related Articles
RAK 7258/7268 Indoor LoRaWAN Gateway Firmware Upgrade
ALERT: This firmware (WisGateOS) is applicable only to non-V2 version of RAK7268 or RAK7258. RAK7268 V2 has different firmware WisGateOS 2. For RAK7268 V2 firmware update, see here: ...
Instruction Manual for Zenseio LSMP-2103 Device
1. Document revision 1.35 January 15, 2026 Copyright 2017-2026 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used industrial sensors using ...
Instruction Manual for Zenseio CSMP-4103 Device
1. Document revision 1.15 January 15, 2026 Copyright 2017-2026 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used industrial sensors ...
LoRaWAN Product Certification
Reducing Signal Interference for a LoRa Gateway
If the gateway is missing lots of LoRa messages, it could be due to strong radio interference from other telecomunications equipment mounted close to the gateway. Relocating the gateway as far as you can from the interference source would be the best ...