Installing Your Zenseio Device Hardware
To learn how to set up your Zenseio Device's Hardware, please refer to the Hardware Installation Instructions Section of the CSMP Device User Manual for CSMP Devices, and the Hardware Installation Instructions Section of the LSMP Device User Manual.
Never power on your Zenseio Device without having its antenna attached, as this can permanently damage your devices radio
Related Articles
Instruction Manual for Zenseio LSMP-2103 Device
1. Document revision 1.35 January 15, 2026 Copyright 2017-2026 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used industrial sensors using ...Instruction Manual for Zenseio CSMP-4103 Device
1. Document revision 1.15 January 15, 2026 Copyright 2017-2026 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used industrial sensors ...Updates to Zenseio Device Hardware (2023)
The latest models of Zenseio's LSMP & CSMP devices (2023, hardware version 4.1 designation on PCB) will ship with a few differences from previous models: Improved non-rechargeable battery: it has more capacity and better low-temperature performance, ...Instruction Manual for Zenseio Solar Charger Kit (V1)
Document revision 1.1 January 18, 2021 Copyright 2018-2023 Zenseio LLC NOTE: This manual applies to version 1 (V1) of Zenseio Solar Charger Kit 1. Introduction Zenseio Solar Charger Kit has been developed specifically for CSMP/LSMP devices to provide ...LSMP Quick Start Guide
1. Initial Setup 1.1. Connect the Included Antenna WARNING: Use only the included antenna or the one approved by Zenseio for this type of device Keep the antenna connected at all times when the power switch is turned on Do not power down the unit ...