Common Soil Probe Wiring Guidelines

Common Soil Probe Wiring Guidelines

For your convenience, the description of the probe wire colors is as described in the table below. But, always consult with the probe’s manufacturer for the definitive reference, in case the color assignment changes.
  1. SDI-12 Data connects to terminal “SDI-12”
  2. Power connects to terminal “VAUX”
  3. Ground connects to terminal “GND”
Probe Manufacturer
LSMP/CSMP connectors
SDI-12
GND
VAUX
Sentek
white
green
red
Greenshield
green
yellow
brown
HSTi
blue
green
brown
AquaCheck
blue
green/yellow
brown
EnviroPro
blue
black
red
METER/Decagon
orange
bare
brown

Important: Please note that while the SDI-12 standard is capable of connecting multiple SDI-12 probes to the same master logger, LSMP device supports one SDI-12 probe at a time. Do not connect more than one probe. Additionally, ensure that the SDI-12 address of the probe must be “0”.

To learn more, see the LSMP Device User Manual and the CSMP Device User Manual



    • Related Articles

    • Which Soil Moisture Probes are Compatible with Zenseio Devices?

      Currently, Zenseio LSMP and CSMP devices supports the following SDI-12 soil moisture probe brands: Sentek Greenshield AquaCheck HSTi GroPoint TriBus Meter Group / Decagon Other types of probes and sensors may be readily supported through ...
    • Connecting a Soil Moisture Probe to your LSMP Device

      To learn how to connect a soil moisture probe (or another SDI-12 compatible sensor) to your LSMP device, see the Soil Moisture Probe Setup section of the LSMP Device Manual.
    • Instruction Manual for Zenseio LSMP-2103 Device

      1. Document revision 1.33 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using LoRaWAN ...
    • Instruction Manual for Zenseio CSMP-4103 Device

      1. Document revision 1.13 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using ...
    • Zenseio Solar Panel Wiring Quick Start Guide

      Copyright 2018-2023 Zenseio LLC Kit Contents: Wiring Instructions: Remove the rubber plug from the small cable gland. Ensure the extension cable is disconnected from the solar panel. Thread the solar panel extension cable through the small cable ...