Making Sure Your Device's Radio is Seated Correctly
Push lightly with fingers on the edges of the radio module (as in the photo) – this helps make sure the radio is seated all the way and can solve issues from dust or dirt preventing a good connection. After reseating, press the button a few times over several minutes, and, if still no luck, power cycle the device (once it stops flashing lights for a while).
Related Articles
How to verify if the CSMP radio module is indeed bad when seeing "radio unresponsive" error (public)
For CSMP device, when you see the "radio unresponsive" error on the Status tab of ZenConfig mobile app, please see this article (for registered user only)One or more devices aren't working correctly. What should I do?
If your device still does not function correctly after taking standard troubleshooting measures (as listed in the Knowledge Base articles), please contact Zenseio Support via one of the following methods: Please DO NOT dismantle or mail your device ...How to Update Your Zenseio Device's Firmware
NOTE: Only Windows 10 or 11 is currently supported. This process will update your LSMP or CSMP device to the latest firmware version. It will also update the device configuration to the default one. The process is very easy and takes about 1 minute. ...What can cause interference with a Zenseio Device?
Zenseio Devices operate using low powered radio technology, and therefore are subject to being affected by radio traffic in area surrounding where the device is installed and operating. Though common smaller radio powered devices like nearby drones ...Instruction Manual for Zenseio CSMP-4103 Device
1. Document revision 1.13 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using ...