Checking Status Information Using the Zenseio Mobile App

You can test and check your device's status through an NFC connection using the Zenseio Mobile App, to do so, see the Showing Device Status Section of the Zenseio Mobile App Manual.

You must be close enough to the device to use your phone's NFC reader to connect to it

• Related Articles

• How to Configure VAUX Using the Zenseio Mobile App

  5.3 VAUX Settings (LSMP/CSMP device only) If the device is equipped with auxiliary voltage generator inputs, VAUX pin provides output voltage to power or bias an external sensor. Generated Output Voltage - sets the power supply voltage for the ...

• Instruction Manual for Zenseio LSMP-2103 Device

  1. Document revision 1.33 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using LoRaWAN ...

• Instruction Manual for Zenseio CSMP-4103 Device

  1. Document revision 1.13 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using ...

• Zenseio Mobile App User Guide

  Document Revision 2.1 May 1, 2020 Copyright 2018-2023 Zenseio LLC 1. App Installation Download from Apple App Store: https://apps.apple.com/us/app/zenconfig/id1513854657 An iPhone 7 or higher with iOS 13.0 or higher is required to download and ...

• Configuring Alerts for GPI Sensors Using the Zenseio Mobile App

  I/O Mode - selects the functionality of the input: Off - the input is ignored Digital - a weak pullup voltage is supplied by device on the GPI input, and the input is sampled at Sensor Read Intervals. If the voltage is pulled externally close to 0 V ...