How to decipher the status lights on CSMP/LSMP devices?
In general, the green status light indicates correct
progress of device reading sensors, connecting to the network, and sending
data. Red status light indicates some issues. The issues may be transient (e.g.
missed network connection) as the device tries to “fix” them, and some may be
more serious (e.g. no network coverage). For further debug, you can use
ZenConfig mobile app (“Status” tab) or TeraTerm real-time data logging.
Related Articles
Troubleshooting Pressure Triggered Switch on LSMP or CSMP Connected to GPI Inputs
Check the GPIx mode setting for the GPI input the switch is connected to. To check it, download ZenConfig mobile app for iPhone or Android phone. (App instructions: Zenseio Mobile App User Guide) As long as you have a pressure switch connected ...
How can I quickly test if my device is working?
You can test if your CSMP or LSMP device is functioning by pressing the user button located inside its case. This will cause your device to attempt to connect to Zenseio's servers and make a transmission according to the device's configuration. This ...
How to Use Modbus RS-485 Sensors with Zenseio LSMP and CSMP Devices
We're thrilled to announce the integration of Modbus RS-485 industrial sensor support with firmware version 23 for the LSMP-2103 and CSMP-4103 devices. This update opens up new possibilities for industrial applications by allowing these devices to ...
Enhanced Signal Indicators for LSMP Devices
The latest firmware update (version 25) for LSMP-2103 devices, identifiable by a device ID prefix '22' (e.g., 220000), introduces new signal strength and quality indicators within the ZenConfig mobile app's status page. These enhancements aim to ...
Instruction Manual for Zenseio CSMP-4103 Device
1. Document revision 1.13 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using ...