Is there anything I should do before starting up my LSMP Device?
It’s best to turn on the device when it is in the range of the LoRaWAN gateway belonging to the network to which the device is registered to. During the initialization, the device will attempt to connect to the LoRaWAN network and will start reading the probe/sensor and sending their values to the cloud servers. If there is no network in range, the device will not be able to join and will retry on the next scheduled update period (once an hour). After a few hours of retries with no success in joining the network, the device will switch to less frequent retries to conserve the battery.
Related Articles
Instruction Manual for Zenseio LSMP-2103 Device
1. Document revision 1.33 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using LoRaWAN ...
LoRaWAN Range Tester Manual
This is a LoRaWAN range tester and provides field coverage information for LoRaWAN gateways in the field: Location GPS latitude/longitude LoRa signal strength (min/max) Distance to gateways (min/max) Number of gateways in range Rechargeable battery ...
Instruction Manual for Zenseio CSMP-4103 Device
1. Document revision 1.13 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using ...
Is there anything I should do before starting up my CSMP Device?
It’s best to turn on the device when it is in the range of supported cellular LTE-M (a.k.a. Cat-M1) networks. During the initialization, the device will attempt to connect to the LTE-M network and will start reading the probe/sensor and sending their ...
LoRaWAN Product Certification