How to connect a GPI sensor to your LoRaWan device

How to connect a GPI sensor to your LoRaWan device

To learn how to setup a GPI protocol compatible sensor with your LSMP device, see the GPI Sensor Setup Section of the LSMP Device User Manual. 
    • Related Articles

    • Instruction Manual for Zenseio LSMP-2103 Device

      1. Document revision 1.33 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using LoRaWAN ...
    • How to Connect Maxbotix Ultrasonic Ranger Sensor

      Firmware version 23 introduces support for Maxbotix ultrasonic (sonar) range sensors on the GPI1 input for both LSMP-2103 and CSMP-4103 devices. This enhancement allows for precise distance measurement capabilities in various applications. Compatible ...
    • What types of GPI Sensors are compatible with Zenseio Devices?

      Zenseio Devices can monitor many different types of commonly used sensors via GPI input: tipping rain buckets, pressure switches, pressure transducers/transmitters, flow meters, temperature sensors, and others. There are 3 independent general purpose ...
    • Connecting a Soil Moisture Probe to your LSMP Device

      To learn how to connect a soil moisture probe (or another SDI-12 compatible sensor) to your LSMP device, see the Soil Moisture Probe Setup section of the LSMP Device Manual.
    • How to Connect a Temperature Sensor to a LSMP or CSMP Device

      Temperature Sensor (Thermistor) Installation Currently, only thermistors sold by Zenseio are supported. The following installation is for this thermistor only. Select “Thermistor (1-Wire)” mode in the Zenseio mobile phone configuration app (ZenConfig ...