What can cause interference with a Zenseio Device?

What can cause interference with a Zenseio Device?

Zenseio Devices operate using low powered radio technology, and therefore are subject to being affected by radio traffic in area surrounding where the device is installed and operating. Though common smaller radio powered devices like nearby drones or cellular devices should not affect your device's operation, other industrial grade sensors or radio devices operating nearby may interfere with your device's radio connection. If possible, try to avoid setting up your device near any other radio operated devices.

To learn more, see the Recommendations for Boosting Antenna Signal Knowledge Base article, or the Signal Section of the Zenseio Dashboard Guide

    • Related Articles

    • Recommendations for Boosting Antenna Signal

      Problem As the crops grow, we're increasingly seeing radio signal degradation, especially with the row crops, where the telemetry is not mounted high enough. Here is an app note showing how to best mitigate this situation. Please take the recommended ...

    • Enhanced Signal Indicators for LSMP Devices

      The latest firmware update (version 25) for LSMP-2103 devices, identifiable by a device ID prefix '22' (e.g., 220000), introduces new signal strength and quality indicators within the ZenConfig mobile app's status page. These enhancements aim to ...

    • How can I quickly test if my device is working?

      You can test if your CSMP or LSMP device is functioning by pressing the user button located inside its case. This will cause your device to attempt to connect to Zenseio's servers and make a transmission according to the device's configuration. This ...

    • Instruction Manual for Zenseio CSMP-4103 Device

      1. Document revision 1.13 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio Cellular Soil Moisture Pro (CSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using ...

    • How to verify if the CSMP radio module is indeed bad when seeing "radio unresponsive" error (public)

      For CSMP device, when you see the "radio unresponsive" error on the Status tab of ZenConfig mobile app, please see this article (for registered user only)