LoRaWAN Range Tester Manual
This is a LoRaWAN range tester and provides field coverage information for LoRaWAN gateways in the field:
- Location GPS latitude/longitude
- LoRa signal strength (min/max)
- Distance to gateways (min/max)
- Number of gateways in range
- Rechargeable battery (by USB) and battery status
- Configurable TX interval, TX power level, and data rate
- TFT touch screen. Easy to use
It has been integrated with Zenseio LoRaWAN network server, so it works out-of-box. It is useful for finding acceptable locations for LSMP station installations.
Related Articles
Instruction Manual for Zenseio LSMP-2103 Device
1. Document revision 1.33 January 3, 2022 Copyright 2017-2023 Zenseio LLC 2. Introduction Zenseio LoRa Soil Moisture Pro (LSMP) device is providing long-range telemetry for SDI-12 soil moisture probes and other commonly used sensors using LoRaWAN ...LoRaWAN Product Certification
Is there anything I should do before starting up my LSMP Device?
It’s best to turn on the device when it is in the range of the LoRaWAN gateway belonging to the network to which the device is registered to. During the initialization, the device will attempt to connect to the LoRaWAN network and will start reading ...How to Connect a Temperature Sensor to a LSMP or CSMP Device
Temperature Sensor (Thermistor) Installation Currently, only thermistors sold by Zenseio are supported. The following installation is for this thermistor only. Select “Thermistor (1-Wire)” mode in the Zenseio mobile phone configuration app (ZenConfig ...Connecting a Soil Moisture Probe to your LSMP Device
To learn how to connect a soil moisture probe (or another SDI-12 compatible sensor) to your LSMP device, see the Soil Moisture Probe Setup section of the LSMP Device Manual.