How can I maintain my Zenseio Device?

How can I maintain my Zenseio Device?

This product is designed to provide years of service when it is properly installed and maintained. Here are the guidelines:
  1. Do not attempt to disassemble or modify the device. Aside from the battery, there are no user serviceable parts inside.

  2. Prevent water damage to the electronics inside by always closing the lid using two latches, locking the cable gland tightly around an external sensor cable, and installing the supplied antenna. When installed outdoors, the device should never have any exposed openings. Never submerse the device.

  3. When closing the lid, ensure no wires or other objects are caught in the lid seams

  4. Maintain the installation in the upright orientation unless approved differently by the manufacturer.

  5. Always operate the device under the operating conditions specified in the Product Specification. Operating outside the specified operating range may result in damage to the device or fire.

  6. Connect only the supplied or manufacturer-approved antenna, and always keep it connected when the device is in power “On” state. Always point the antenna tip vertically.

  7. If needed, replace the battery only with the manufacturer-approved battery. Dispose of the old battery according to your local regulations.

  8. If needed, the device exterior can be cleaned with water or diluted soap detergent - never with harsh detergents nor other chemicals. Never clean the interior with any liquid.

  9. If requested by the manufacturer, perform the firmware upgrade according to the outlined procedure.

  10. Do not misuse the device. Follow instructions on proper operation and only use as intended. Misuse could make the device inoperable, damage the device and/or other equipment, or harm users.

  11. Do not apply excessive pressure on the device electronics. This could result in damage to the device or harm to users.

  12. Do not use this device in explosive or hazardous environments unless the model is specifically approved for such use. The device may cause sparks. Sparks in explosive areas could cause explosion or fire and may result in property damage, severe injury, and/or death.

  13. When the device reaches its useful end of life, dispose of it according to your local regulations.